..
I stumbled across this on another forum that I run. I had completely forgotten that I had posted it, which is not surprising considering that I posted it back in 2017.
It is part of the Workshop Practice series of books and covers making springs. It includes All necessary calcs and details for leaf springs, which are obviously relevant to Cyclekarts.
Hopefully someone might find it helpful.
It is part of the Workshop Practice series of books and covers making springs. It includes All necessary calcs and details for leaf springs, which are obviously relevant to Cyclekarts.
Hopefully someone might find it helpful.
Mick
set the type of the post as
Discussion — 9 months ago
I got stuck on spring supply for ages before I decided to go transverse leaf instead.
I ended up going to the local trailer parts store and got the smallest 4 leaf eye to eye spring they had - 640mm from memory - and removing the three helper leaves, just leaving the long spring with the eyes.
One 45 x 6mm leaf has a pretty good spring rate for my fat butt (95kg+) and rides smoothly.
From memory about $65
I ended up going to the local trailer parts store and got the smallest 4 leaf eye to eye spring they had - 640mm from memory - and removing the three helper leaves, just leaving the long spring with the eyes.
One 45 x 6mm leaf has a pretty good spring rate for my fat butt (95kg+) and rides smoothly.
From memory about $65
- Page :
- 1
There are no replies made for this post yet.