-
Riley 9 Brooklands commented on this post about 9 months agoMail call...
Found these springs from a Kawasaki Mule and thought they might work for a Cyclekart. Unfortunately the eye-to-eye distance is a little long at 750mm. Material is 6x50mm so also a little too heavy duty. They have three leaves, two of which are usable. I'm figuring that I can weld some mounting eyes to the second leaves which are 600mm long to make another pair of springs. The longer springs could be chopped down and used as 1/4 ellipticals on another build.
Was hoping that these could be a potential source of springs but alas the search continues.
Post is under moderationStream item published successfully. Item will now be visible on your stream.
The Cyclekart Club of Australia acknowledges the Traditional Custodians of country and their connections to land, sea and community.
We pay respect to Elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.
The Cyclekart Club of Australia Incorporated
Spring rate for the single leaf at 750mm eye to eye is 89.23 lb/inch
Spring rate for the Renegade Cyclekart springs is 103.57Interestingly...
Spring rate for the single leaf at 750mm eye to eye is 89.23 lb/inch
Spring rate for the Renegade Cyclekart springs is 103.57 lb/inch
So the additional length reduces the spring rate to an acceptable level. More ...