Cyclekart Club of Australia Logo              
  •   Mick commented on this post about 1 year ago
    You could also buy this spring instead
     https://www.aliexpress.com/item/1005003514241068.html
    Comments (3)
    • Thats not a bad solution but it is worth noting that they are about 250mm longer then the buggy cart springs that they favour in the US and so willThats not a bad solution but it is worth noting that they are about 250mm longer then the buggy cart springs that they favour in the US and so will shift the front axle back by about 125mm if you are using the Stevenson design. Just need to compensate for that in the design somehow.
        More ...
      Reported
    • Good to note. Ill be running my spring horizontally, and this spring is perfect for that application. So i guess its no good for 2 leaves up front
      Reported
    • TBH there's very little choice as the buggy springs that the US folks use are just not available here. These will work fine, but just need to adjustTBH there's very little choice as the buggy springs that the US folks use are just not available here. These will work fine, but just need to adjust the mounting locations a little. Good find.   More ...
      Reported
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Unable to load tooltip content.

 

The Cyclekart Club of Australia acknowledges the Traditional Custodians of country and their connections to land, sea and community. 

We pay respect to Elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.

 

The Cyclekart Club of Australia Incorporated