CycleKarts
23/02/2026
Justin's Morgan Inspired Cyclekart
Created by
Justin Wilkie
This will be my attempt at a Morgan 3 Wheeler inspired cyclekart. Obvious changed to the traditional design will be made along the way to make the build a little easier for myself, but ill try to do picture updates as i move along :)
1 Comments
165 Views
Pursang
2/4/26, 8:42 am
Hi Justin, Great progress, I'm envious! One thing, you might need to plan for a spring loaded chain tensioner on your drive chain. The swingarm looks like it will move the axle forwards under Bump. If so, the chain will loosen because the counter shaft sprocket and the swingarm pivot are off line and far apart. Not a criticism, just an observation from 50 years of Dirt Bike racing. Cheers, Pursang!
Log in to comment
Version 3 of the front suspension arms
Rear suspension tab welded to the middle of the rear swinarm
Type / for commands...
Brake pedal/master/switch mounted
Throttle pedal/linkage/cable mounted
Front arms were purchased and heavily modified to suit
Chassis turned out alright i think
Currently working on rear suspension (due to engine mounting where the motorcycle shock would normally be)
Rear handbrake was a left over from a small 49cc atv
/m
1 Comments
194 Views
Loading...
No more posts.