-
Les reacted to this post about 1 year agoManaged to find a bit of time to finish off the rear hub and broach the keyway. The keyway is cut using a broach which runs in a guide inside the hub. I had to machine the guide to suit the hub diameter, then it was simply a case of pressing the broach through the hub using lots of cutting oil. The broach is spaced out on successive passes using shims until the final depth is achieved.
Next job is to finish machining the rear axle. I have to mill a slot to accept the key and turn threads on the ends for the axle nuts.
Post is under moderationStream item published successfully. Item will now be visible on your stream.
The Cyclekart Club of Australia acknowledges the Traditional Custodians of country and their connections to land, sea and community.
We pay respect to Elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.
The Cyclekart Club of Australia Incorporated