..
Hi everyone.
I have recently discovered cyclekarts and keen to build one. Have a friend who is also interested in building one.
We are located in Lockyer Valley Queensland. About halfway between Brisbane and Toowoomba.
I wanted to know if there is any racing for cyclekarts here in Queensland as would like to race.
Have watched videos of the racing in the USA and it looks so much fun.
Regards
Hamish.
I have recently discovered cyclekarts and keen to build one. Have a friend who is also interested in building one.
We are located in Lockyer Valley Queensland. About halfway between Brisbane and Toowoomba.
I wanted to know if there is any racing for cyclekarts here in Queensland as would like to race.
Have watched videos of the racing in the USA and it looks so much fun.
Regards
Hamish.
Try this place for steel https://orrcon.com.au/products/tubular-steel/rectangular-hollow-section-rhs
They have 1.6 x 75 25 mm in Galv or 2mm painted
I went for painted as I don't like welding Galv And A plan to Cut holes on the inside of frame to reduce the weight
They have 1.6 x 75 25 mm in Galv or 2mm painted
I went for painted as I don't like welding Galv And A plan to Cut holes on the inside of frame to reduce the weight
Don't give up do your research you can find every thing here in Australia .
Rhs 75 x 25mm . 2mm or 1.6mm is Available just take a bit of searching .
I am going to using 625mm trailer leaf springs eye to eye just removed all the extra leafs.
you can get parts of Ebay Amazon GoKart shops cut price racing .
Rhs 75 x 25mm . 2mm or 1.6mm is Available just take a bit of searching .
I am going to using 625mm trailer leaf springs eye to eye just removed all the extra leafs.
you can get parts of Ebay Amazon GoKart shops cut price racing .
Hamish Gale
set the type of the post as
Question — 1 year ago
- Page :
- 1
There are no replies made for this post yet.