Pinned Items
Recent Activities
-
phil33 reacted to this post about 1 week agoNSW Southern Highlands
We’re rolling into One Raceway on Saturday, 16 November for the Goulburn Car & Motorcycle Show with a Cyclekart Show & Shine Display.
Expect characterful, hand-built machines, plenty of build tips, and friendly faces. Thinking about building one? Come talk to us and grab the starter info. Want to show off your hard work,...NSW Southern HighlandsMore
We’re rolling into One Raceway on Saturday, 16 November for the Goulburn Car & Motorcycle Show with a Cyclekart Show & Shine Display.
Expect characterful, hand-built machines, plenty of build tips, and friendly faces. Thinking about building one? Come talk to us and grab the starter info. Want to show off your hard work, we've got you. Half finished but want to display your handiwork, you are more than welcome.
200 of the Southern Highlands finest cars and motorcycles all one display at One Raceway formerly Wakefield Park.
Only 2 hours from Sydney, 1 hour from Canberra and under 3 hours from Wagga. So it doesn't if your coming from Sydney, Southern Highlands, the Riverina or Northern Victoria. We've got you covered
Cyclekart Club of Australia – on display 16 November at One Raceway.
Register your interest by emailing nsw@cyclekarts.org.au
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
phil33 reacted to this post about 1 week agoHaven't updated in a while, but work is progressing slowly.
I've just about amassed all the parts I need to complete the build apart from brake lines and a chain.
I now have a boxed in cabin which I am skinning in 0.5mm aluminium. I've found that with such a thin metal its quite easy to get a nice radius on body panels by running the sheet...Haven't updated in a while, but work is progressing slowly.More
I've just about amassed all the parts I need to complete the build apart from brake lines and a chain.
I now have a boxed in cabin which I am skinning in 0.5mm aluminium. I've found that with such a thin metal its quite easy to get a nice radius on body panels by running the sheet over your legs back and forth like you are drying yourself with a towel. Sounds crazy but it works.
Also made a foam buck for a nosecone. Got it into shape over the weekend and laid down my first layers of glass and resin. By far the messiest thing I have ever done. I just used chopped mat for the fibreglass, but in hindsight i would use woven cloth for straight lines and simple curves whilst saving the chopped mat for the more intricate compound curves. Now time to sand, cut and recoat where necessary
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
phil33 reacted to this post about 1 week agoIt is with great pleasure the CCA would like to announce the first of many exciting events for the upcoming Spring and Summer Event season
NSW Cyclekart Barbecue – Meet & Greet!
We’re firing up the barbecue and rolling out the karts for a relaxed day with the Cyclekart community!
Sunday 19th October 2025
11:00 AM – 2:30 PM
Camden Town Farm,...It is with great pleasure the CCA would like to announce the first of many exciting events for the upcoming Spring and Summer Event seasonMore
NSW Cyclekart Barbecue – Meet & Greet!
We’re firing up the barbecue and rolling out the karts for a relaxed day with the Cyclekart community!
Sunday 19th October 2025
11:00 AM – 2:30 PM
Camden Town Farm, 40 Exeter Road, Camden
Come along for:
• A static display of Cyclekarts
• Free barbecue lunch (just BYO drinks & chairs)
• A chance to meet fellow local Cyclekartists
Everyone’s welcome — whether you’ve built a kart, are thinking about it, or just want to check out what it’s all about.
Register your interest by emailing nsw@cyclekarts.org.au
It’s going to be a fun, low-key day — we’d love to see you there!
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
Stream item published successfully. Item will now be visible on your stream.
-
phil33 commented on this post about 2 weeks agolike the Z`ed frame ,its what I should have done . Hindsight is 20 20 vision.Comments (3)
-
me too! I originally built a straight ladder frame. I thought it was good to go, then work out because I was using pillow block bearings for the rear More ... -
Haha, same here. Having the zee'd chassis with pillow block bearings allows easier rear axle removal compared to running the axle through the chassis More ... -
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
-
Pursang reacted to this post about 2 weeks agoHave 3D printed some hub caps for the cheap chinesium pit bike wheels. Also some weatherproofing in the guise of black paint, as I don't currently have shed, Still moving forward, albeit slowly.
Comments (2)-
Amazing work! Can we buy some off you? -
Not at this very moment, but watch this space. Something maybe coming soon
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
-
Pursang reacted to this post about 2 weeks agoA bit more progress, starting to shape a basic frame and and now have the rack and pinion steering complete
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
Pursang reacted to this post about 2 weeks agoMoving along slowly. It now rolls. Done a mock up with the wheels on to get an idea how it looks
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
Pursang reacted to this post about 2 weeks agofront axle starting to take shape and more parts slowly starting to arrive.
Some slight design changes, there's a plethora of Austin based karts already, so have decided to base my design on the ERA Type-B. I will most likely model mine off chassis no.10, ERA R10B of Peter Whitehead who won the 9th Australian Grand Prix in this car at Bathurst...front axle starting to take shape and more parts slowly starting to arrive.More
Some slight design changes, there's a plethora of Austin based karts already, so have decided to base my design on the ERA Type-B. I will most likely model mine off chassis no.10, ERA R10B of Peter Whitehead who won the 9th Australian Grand Prix in this car at Bathurst in 1938.Post is under moderationStream item published successfully. Item will now be visible on your stream. -
Pursang reacted to this post about 2 months agoRecovering from the spicy flu, but the weather outside was perfect. So over the last couple of days I've finally made a start!
I've dumbed down the design and am going with a Stevenson style ladder frame.
The frame has been welded together and I'm slowly getting a big stockpile of parts happening.
There is finally some movement at the station
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
Pursang reacted to this post about 3 months ago
Been making up some drawings to get my head around what needs to happen. These are just a rough guide, but I'll update them as I go and hopefully have a full set off plans by the end of the build.
Made my first purchase for the build today. Ordered the RHS for the chassis and the pillow bearings I'll use for the rear axle.
At last things are...Been making up some drawings to get my head around what needs to happen. These are just a rough guide, but I'll update them as I go and hopefully have a full set off plans by the end of the build.More
Made my first purchase for the build today. Ordered the RHS for the chassis and the pillow bearings I'll use for the rear axle.
At last things are starting!Post is under moderationStream item published successfully. Item will now be visible on your stream. -
Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
Stream item published successfully. Item will now be visible on your stream.
-
Post is under moderationStream item published successfully. Item will now be visible on your stream.
There are no activities here yet